Two of the most common screw types you’ll find in your local hardware store are wood screws and deck screws. If you’re working on a project that requires screws and you’re not sure which type to reach for, fear not – I’ll break down both of these screw types in detail.
Tools
Is There an Alternative to Pocket Hole Screws?
Pocket hole screws aren’t cheap – especially those name-brand screws manufactured by Kreg. If you’re working on a project involving pocket holes, then you’ve probably had the thought “can you use regular screws inside pocket holes?”
How to Use Locking Pliers (Vise Grips)
Perhaps the most useful tool in the DIYers arsenal, it’s hard to overstate the utility of a pair of humble vise grips. Whether it’s extracting broken fasteners, loosening stubborn nuts, bending and shaping metals, or even temporarily replacing a car’s manual window winder, a pair of locking pliers is an invaluable addition to any toolbox.
How to Use a Kreg Jig R3: A Step-By-Step Guide
The Kreg jig R3 is without a doubt one of the most popular pocket hole jigs on the market and has been the starting point for many woodworking hobbyists. It might not sport all the bells and whistles of Kreg’s fancier models, but it contains everything you need to get started with pocket hole joinery.
How to Remove a Broken Drill Bit?
A broken drill bit is one of those things that you don’t plan for but is bound to happen given a long enough time using a drill. Whether you’re working with wood, metal, or masonry, drill bits have a tendency to break when you push them to the limit, leaving you with an unsightly metal protrusion that needs extracting.
Can You Use an Impact Driver as a Drill?
Impact drivers are an incredibly useful tool when it comes to driving fasteners of all shapes and sizes, but they’re not exactly known for their drilling prowess. The question often comes up when you’re faced with a hole that needs drilling and only an impact driver within reach – can you use an impact driver as a drill?
When Not to Use an Impact Driver?
Impact drivers are one of the most useful tools to be developed in the past 100 years, but they aren’t perfect for every job. Sometimes a regular old drill/driver is the better choice, and other times you’re better off reaching for a handheld screwdriver – like when you need to complete delicate work.
Circular Saw Kickback: What Causes it & How to Prevent it?
One of the scarier things about using any powered saw is the potential for kickback. Kickback is a common occurrence with both table saws and circular saws, and unfortunately, it results in hundreds of emergency room visits every year without fail.
How to Cut a Groove in Wood with a Circular Saw?
While there are certainly more efficient tools for cutting a groove in wood, you can still get a fairly good result using just a circular saw and a few basic hand tools.
How to use a Rip Fence (on a Circular Saw)?
The rip fence is one of those things that can have a huge impact on your work, but is so basic that people often toss them out when they find them bundled with their circular saw!